Kategorier

AXIS Partner
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

Søg

RJ45 network/ethernet surge protector

8 Way coaxial surge protection device Type:KLF-X/8TV


DKK 1,598.00 inkl. moms

KLF-RJ45-8E

Tilgængelighed: På lager

19 andre varer i samme kategori:

RJ45 network/ethernet surge protector

KLF-RJ45-8E

1) Product Description:


This product is designed according to IEC standards and relevant national standards. Apply to lightning surge protection of computer data interface or network data system of electronic equipment.It is applied to discharge, clamping,voltage stability principle,to achieve an efficient and reliable anti-shock feature high-voltage pulse and accurate clamping voltage.With advantage of low-volume design,excellent transmission performance,fast response, low insertion loss.It is designed with advantage of large intake capacity and long lifetime.Wiring installation is convenient and  maintenance is simple.It is suitable for lightning and surge protection of network servers, routers,network switches, HUB,100/1000M computer network,IP phones and other devices in the network information terminal line.


2) Product Parameters:

TYPE:

KLF-RJ45-8E

Operating Voltage (Un)

5V

Transmission rate (bit /s)

100/1000M

Insertion Loss 

≤0.2dB

Impulse voltage (10/700µs)

6KV

Limit voltage (Up)

≤15V

Interface Model

RJ45

Protected Core Wire

1~8line  

Protect the port quantity

8

Working Environment

Temperature -40°C+70°C;Relative humidity<90%

Dimension(L×W×H)

114×42×168mm

Weight

0.42kg

3) Product Installation:


1.The product is installed between the RJ45 interface signal channels which is at the junction

of LPZ2 area and LPZ3 area and the protected device,the output end will connect the protected

equipment.

2.All wirings must be solid and be connected by electric.

3.Apply to indoor operation,such as outdoors installation,you must install waterproof

shell.

4.Lightning proof grounding should be consistent with lightning protection regulatory

requirements, grounding wire should be as thick and short as possible,resistance should be less

than 4Ω.The grounding line:BVR ≥ 2.5mm2.


Kurv  

Ingen varer

Fragt DKK 0.00
Samlet DKK 0.00

Kasse

Nyhedsbrev

AXIS Partner

Søg